Sale!
81I1%2BKDQzqL._SL1500_.jpg

BK Precision 388B Manual-Ranging, Average-Sensing Digital Multimeter, with Logic Test and Transistor Gain, 20 Amp, 750VAC, 1000VDC, 40 Megaohms, 40 Microfarads, 4 MHz

$139.00 $69.50

1000 in stock

BK Precision 388B Manual-Ranging, Average-Sensing Digital Multimeter, with Logic Test and Transistor Gain, 20 Amp, 750VAC, 1000VDC, 40 Megaohms, 40 Microfarads, 4 MHz Description

Style:with NIST Certificate The BK Precision 388A digital multimeter (also known as a multitester) is an average-sensing, manual-ranging meter for measuring current, voltage, resistance, capacitance, and frequency in electrical testing applications. The meter comes with a set of detachable test leads. The logic test reports the logic state of an electronic circuit. The meter measures the forward current gain of NPN and PNP transistors. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit’s diodes. The microamp function identifies current changes in flame detector applications. A hold function keeps a reading on the display, even after the meter has been disconnected. The maximum hold function keeps the highest value for the session on the display. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 45 minutes of nonuse to conserve battery life, and a low-battery indicator signals when the meter’s batteries need to be replaced. The meter’s body is made of molded rubber, which helps protect it against damage from falls, impacts, and abrasion. The meter has a built-in tilt stand for propping on a flat surface, and a hanging strap is included for hands-free use.This average-sensing , or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform. It is a manual-ranging meter that requires the operator to choose the appropriate operating range for the property being measured. The LCD has a 4,000-count resolution, meaning it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 1,000V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building’s AC power supply).SpecificationsMaximum alternating current (AC) or direct current (DC) input20 ampMaximum AC voltage input750 volts (V)Maximum DC voltage input1,000VMaximum resistance detected40 megaohmsMaximum capacitance detected40 millifarads (mF)Maximum frequency detected4 megahertz (MHz)Logic thresholdHi = 2.8 + or – 0.8V; Lo = 0.8 + or – 0.5VTransistor gain measurement range0 to 1,000Power supply9V battery (one, installed)Standards metEuropean Conformity (CE) marked; Underwriters Laboratory listed; International Electrotechnical Commission (IEC) safety standard 61010-1Weight400 g/14.1 oz.Dimensions198 x 90 x 44 mm/7.8 x 3.6 x 1.7 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Multitesters (also called multimeters) are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multitesters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multitesters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on the International Electrotechnical Commission’s (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.BK Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives.What’s in the Box?BK Precision 388A average-sensing digital multimeter(1) Set test leads9V battery (installed)Spare fuseHanging strapInstructions

BK Precision 388B Manual-Ranging, Average-Sensing Digital Multimeter, with Logic Test and Transistor Gain, 20 Amp, 750VAC, 1000VDC, 40 Megaohms, 40 Microfarads, 4 MHz how to buy

We market a big amount of BK Precision 388B Manual-Ranging, Average-Sensing Digital Multimeter, with Logic Test and Transistor Gain, 20 Amp, 750VAC, 1000VDC, 40 Megaohms, 40 Microfarads, 4 MHz within our Craig Store LLC, so that you might buy the smartest choice for you.

In case you don’t wish to purchase the brand new BK Precision 388B Manual-Ranging, Average-Sensing Digital Multimeter, with Logic Test and Transistor Gain, 20 Amp, 750VAC, 1000VDC, 40 Megaohms, 40 Microfarads, 4 MHz through big cost, you can purchase product through our store.

If you want to buy BK Precision 388B Manual-Ranging, Average-Sensing Digital Multimeter, with Logic Test and Transistor Gain, 20 Amp, 750VAC, 1000VDC, 40 Megaohms, 40 Microfarads, 4 MHz in the usa and other nations and get the merchandise of highest quality and fairly low price, you may make the good option by visiting our own shop. You no longer need to search for shop, because anything that you may need like a customer is simple to find within the catalog of goods on the website associated with Craig Store LLC. We offer the very best BK Precision 388B Manual-Ranging, Average-Sensing Digital Multimeter, with Logic Test and Transistor Gain, 20 Amp, 750VAC, 1000VDC, 40 Megaohms, 40 Microfarads, 4 MHz and also the best in order to the inhabitants all over the world.

Reviews

There are no reviews yet.

Be the first to review “BK Precision 388B Manual-Ranging, Average-Sensing Digital Multimeter, with Logic Test and Transistor Gain, 20 Amp, 750VAC, 1000VDC, 40 Megaohms, 40 Microfarads, 4 MHz”

Your email address will not be published. Required fields are marked *